I'm looking back at your question and realizing I didn't really answer.
Frankly, I don't grind twice anymore, and I don't intend to do so unless and until I do some emulsified sausage. I just use whatever plate I find appropriate. I'm just doing this as a hobby to please myself and those around me, and I found that I get very little (if any) bang for the buck out of a second grind. I would much rather grind once through my 3mm (1/8") plate than do a second grind
Now, if I had infinite time, a larger grinder, and a dedicated cold room where I could keep all my processing stuff, then I might change my answer. However, I don't. I gotta tell you, I am very happy with the texture of what I'm cranking out, and I have folks slapping the table when they try it.
That said, I am pretty much sold on the idea of grinding fat no larger than 4.5mm (3/16"). Fat out becomes a much bigger problem at coarser grinds. It's not that you can't manage it, but it's much more difficult. It's certainly worth the small effort to separate the large chunks of fat in pork butt, beef chuck, and chicken thighs, and then to switch plates (and knives) if you are grinding your leaner bits at coarser than 4.5mm.
@bryarrr_80 said in [Grinder Plate preferences](/post/39402):
> @processhead do you normally use the same plates and grind through twice? Or do you grind once with one plate and then switch to a smaller plate and grind again a second time?
For finer textured sausage I will grind once through the coarse plate once and once or twice through the fine plate.
Like others have said, it all depends on the variety/style of the sausage as to how you grind course or fine.
A lot of this depends on what type of bite you prefer. I did some Italian sausage for a guy who liked a more substantial bite and had me do his next batch with a chili grind.
Personally, I like the smaller grind.
@bryarrr_80 Well Sausage Warrior you can't make a mistake here. The texture and looks is the way you remember it to be. That being said, i grind some sausage with 3/8" because that's how i remember the old polish and Italian sausage. Summer sausage i use 1/4".... hotdogs and bockwurst i double grind 1/8". I would think starters would be 1/4" most grinders come stock with that. Emulsified texture best with 1/8", maybe double grind if you have the patience, and a stuffer plate when you see a use for it. In summary buy what you need, not what you want. Budget wise, i could live and be happy with just the 1/4" until i wanted, and saw a need for a specialty texture. There is no wrong way.... Good sausage is the way you remember that sausage you liked was.
I think I am like a lot of others in that the majority of my grinding is done with either a 3/8 inch plate or a 1/8 inch. If you start making some less common sausage styles, you may find the recipe calls for some other size plate.
I'm afraid I have a similar answer. It depends on what I'm making. Many recipes give some guidance (some better than others) as to what grind you want.
I can tell you this--you're not likely to kick yourself for having a plate you almost never use, but you will if you need a plate you don't have. That said, if you plan on getting a different size grinder fairly soon, you can be a bit more judicious.
@bryarrr_80 It depends on what I am making. Sometimes grinding it twice through the same plate will work. Some sausages have different cuts ground with different plates to give the property texture and finished product look. Breakfast you can use the same plate and grind twice. Keep the meat very cold. An important thing to have is have a cutting blade an grinder plate matched up this way they will wear together.
It just depends on your preference as a lot have said. For andouille I grind once through a 10mm, for summer sausage I grind twice through 10mm, and for the genoa salami I just did I ground the pork and fat through 10mm once and the beef through a 10mm and 4.5mm.
That’s my exact combination for both mentioned (andouille and Genoa)
Can Meat Grinders Grind Animal Bones For Pet Food?
Learn what grinders are suited for grinding some types of animal bones with Walton's and Meatgistics. Watch the video, read the guide, and then post your questions or comments below.
We’re kicking off today with Meat Hacks… A question we get a lot is…Can I use a meat grinder to grind animal bones and make pet food? In some cases, that answer is yes. We have 2 Walton’s meat grinders that are approved, by the manufacturer, to grind SOME types of bones, and the Pro-Cut meat grinders can also grind some types of bones. From Pro-Cut there are #12, 22, and 32 size grinders available, and for the Walton’s grinders, you will want to look at the Walton’s Meat Grinders, in the #22 and #32 sizes. These grinders are capable of grinding smaller, softer animal bones, such as rabbit, whole chickens, chicken quarters, and other birds, due to the power and all metal construction of the units.
But, please avoid trying to grind large or dense animal bones such as bones from any type of large game, pigs, cows, deer, or sheep. And, always remember that busted splintered bones can get into the digestive tract of a pet and cause severe damage and even death by puncturing the walls of the intestines or stomach. So…YES…you can get a grinder capable of grinding certain types of bones by purchasing a Pro-Cut meat grinder or the Walton’s #22 or #32 Meat Grinder, but please do be wary of the dangers that can arise in feeding pets food with bones in them, if you don’t adequately and completely grind the bones.
Subscribe to WaltonsTV
Make sure you subscribe to WaltonsTV and remember to tap the bell next to the subscribed button to get notified about all new videos, plus like and comment on this video, and visit waltonsinc.com and meatgistics.com to find Everything But The Meat!
Subscribe to Meatgistics
Easily subscribe to any category or topic on the Meatgistics community site by clicking the green “Subscribe” button to get an email each time a new post is made!