Brisket Jerky - Jerky 201

[Jonathon]

Brisket Jerky

Trim That Fat!

Now, we have told you in previous classes that you should use a low-fat cut of meat like the eye of the round to make your jerky, and when you think of Brisket, you probably aren’t thinking about a lean cut. Well, a brisket really has 2 parts, the point and the flat, and these are separated by a thick vein of fat. If you are going to use brisket to make jerky, we recommend you use the flat as it has very little intramuscular fat. Now, you do have to spend some time trimming the flat to remove as much of the fat around the outside as possible, but the shape of the flat lends itself to being trimmed fairly well.

Slice it Up

So, we’ve trimmed all the fat off of these, and as you can see, one advantage of using a brisket flat is that it has a very pronounced grain, and we are going to cut against that grain. This will allow the pieces to break down easier in your mouth and make them feel more tender. We are slicing this in 1/4" thick pieces, you can try to cut this by hand or with something like the precise slice knife from Victorinox, but if you have a slicer, I would recommend you go with that.

Picking a Seasoning

Now, the brisket really has a strong beef flavor, obviously, so we want to choose something that will go with that without covering it up. We are going to be using the Colorado Spicy Jerky Seasoning that comes with a 1 oz bag of sure cure. The bag and the sure cure are enough for 25 lb of jerky, but we are just going to be doing about 10 lb, so we need .36 of a lb of the seasoning and 0.4 oz of the cure. We are going to mix these together and then drag our slices through the meat, making sure to coat both sides evenly.

Once everything has been fully coated, we are going to put them in a plastic bag and add just enough water so that everything is submerged. This will further make sure that all areas of the meat are seasoned and cured. With some seasonings that have very large particle sizes, I might not add water as I don’t want those large flakes of seasoning to be washed off, but with something like colorado spicy, which is all very small pieces of seasoning, we’ll go ahead and add the water.

Now, we will set it in the fridge and let it sit overnight in the marinade to allow the cure time to work. If we wanted, we could vacuum tumble this for 30-45 minutes and go ahead and smoke it today, so if you have a tumbler at home, like the marinade express pro, feel free to do that.

Rack Tip & Smoke Schedule

You can cook this in your oven, smoker, or even a dehydrator; just make sure that if you are doing this in your dehydrator that it gets above 160° first. Lay your jerky out flat on racks making sure to leave a way for air to flow through the racks; the easiest way to do this is to leave a 3" x 3" open space in the center of each rack. To get your probe thermometer to read correctly, go ahead and fold over one piece of jerky and insert the probe in between the folds.

We are doing it in our smoker, so we are starting it out at 120° with the vents wide open at both the top and the bottom. This is going to dry the surface of the jerky evenly and allow smoke to adhere and cook evenly, and we will run this drying phase for an hour. Now, we are going to move the temperature up to 145° for 2 hours and close the dampers two-thirds of the way. Finally, we will raise the temp to 175° and cook until the internal temp reaches 160°.

Shop waltonsinc.com for Smokers

Shop waltonsinc.com for American BBQ Systems Smokers

[PapaSop]

Jonathon
Great stuff. Brisket, hmm.
Especially enjoyed the second half of the video. Knew you’d come around. :winking_face:

[Tex_77]

Jonathon I’ve got a batch of Pepper and Garlic jerky ready to go on the dehydrator tonight, but I used bottom round. I may have to give brisket a try!

[Tex_77]

PapaSop Jonathon he looks kinda sickly in the second half of the video, I think the color of that hat, is making him sick. I’m very disappointed in him, hopefully he won’t make that mistake twice.

[PapaSop]

Tex_77 :smiling_face_with_open_mouth_closed_eyes:

[Jonathon]

Tex_77 Lol you’re gonna be disappointed in a BUNCH of the videos we will be releasing in the next few weeks!

[tarp]

Yup I’ve made this same one before and brisket does have its own unique flavor. yummmmmm

[JerkyIsMySalad]

https://www.youtube.com/watch?v=zVR-JLx2Mfs Jonathon Austin PapaSop Tex_77 has anyone ever tried this Jerky? I love how chewy and moist it is and would love to duplicate the texture! It’s almost like its not even dry but it also does not have the raw/undercooked texture. How is this achieved? Rookie looking for a pro…

[Tex_77]

JerkyIsMySalad Haven’t had it. I think you are going to want to look for the videos Jonathon has done where extra sugar is added to the jerky to lock up the moisture in it.

[PapaSop]

JerkyIsMySalad
Looks like those a cut a little thicker and probably not dehydrated to the point as say a Jack Links. I’ve had pieces come out this way from time to time.

[Joe Hell]

JerkyIsMySalad We cut all of our jerky at the shop in 1" x 1" ‘logs’. I will smoke until they hit an internal temp of 160 then transfer to a dehydrator set to 160. As they continue to dry out the color will darken and the outside will visually start to dry out. During this time the dehydrator temp will take a few hours to come back up to the 160 and as it gets closer the jerky will just start to ‘sweat’ a bit. At this point it is usually ready. One way to check is to simply eat some. When I have determined that it is ready I will turn the heat off and let the fan continue to run until they hit room temp and then put them in the walk-in overnight uncovered before packaging.

[Jonathon]

JerkyIsMySalad I’d be interested to see the water activity and pH of that jerky. I’d imagine it is shelf-stable as it is packaged in what looks like hanger bags that usually just sit out at room temperature. We can try this at some point for sure!