If you included cure #1 then I would say that you go have a couple of days but the meat will start turning into a cured product. The problem you have in curing inside a regular fridge (as compared to a dedicated curing chamber) is that you will dehydrate your product too fast. As twilliams mentioned, the sooner the better. I almost forgot, that you don’t have a culture so you may not be able to maintain a product which will acidify enough to kill bad bacteria (conjointly with the cure #1) but if you did the longer you keep it in the fridge the more acidic it will become so your tang would be yuk after you cook it (releasing the ECA)
Sous vide snack sticks
-
Has anyone tried smoking snack sticks and then finishing in sous vide?
-
bubba
Yep. Only way I do it now. Do the same with summer sausage. Huge time saver. -
lkrfletcher Sous Vide Canning PK100 Team Blue Power User Colorado Military Veterans Veteran last edited by
PapaSop
A question. Do you just throw them in the water or cut to length and bag them. How do you do it? -
lkrfletcher Couple of things go into that answer. Are you using a sous vide cooker that circulates the water or are you using a heating element that either is outside the water or is static? If you use one that circulates the water then you will want to bag it as the fats and oils could clog a filter. Other than that though you don’t have to bag it, it won’t remove the smoke flavor or anything. Parksider has done this 100s of times (or so) and he doesn’t bag them as he uses a turkey fryer (I think at least)
Here is some more information on the topic. https://meatgistics.waltonsinc.com/topic/1099/cured-sausage-205-advanced-thermal-processing We also talk about adding humidity but you’ll want to read the end of that post and then the comments.
-
lkrfletcher Sous Vide Canning PK100 Team Blue Power User Colorado Military Veterans Veteran last edited by
Jonathon - yeah I would be circulating in a sous vide, so i think the bags are the way to go. - Thanks for the response and link!
-
lkrfletcher
My first time with this was in a turkey cooker. Last two times was in a meat lug with the Sous Vide circulator. No bags used. I’ve had no issues with meat particles or fats clogging anything. I know Jonathon errors on the side of caution with using bags but that’s up to you.The main thing with the hot water bath is that it saves a ton of time to get the product finished. No more 10-12 hour smoke times. I’m smoking both sticks and sausage to 140-145 then finishing in the water bath. Sticks done in a few minutes, sausage in less than an hour.
As Jonathon said Parksider has done a lot of this and I’ve learned a lot from his methods.
-
Quickest way to do sticks hands down. Never bagged it because we were doing this before sous vide became popular. I’ve been searching for a clam steamer since we do sticks that are 2’ long. Always looking to make the process smoother!
-
Glad I read this. My concern was over shooting in my smoker and fating out.
So most of my products will end vac sealed and frozen. I have several questiona:
Is it safe to cook to 140-145 then cut the kielbasa to package lengths seal and finish sous vide?
When you say finish you do mean set to finished temp on the sous vide? If so how are you checking the internal of them meat at that point if its bagged? Just give it a specific time?
Then after sous vide are you ice bathing it?
Does this process cause an issue with the bagging/ can I freeze in the same bag?
-
Parksider have you thought about a propane burner and large pot like one used for a low country boil ?
-
That’s what we use now. I’d like to lay the sticks flat because they bend trying to keep them vertical.
-
Parksider what about a turkey roaster
-
Not long enough…
-
When the snack sticks are sous vide directly in water do the casings loosen up around the meat or does it stay tight? I like the snap that the casing provide and I don’t want to skin the snack sticks prior to eating. Thanks.
-
John Belvedere I have done it with snack sticks once or twice (I don’t do it all that often since the diameter is so small) and I have never noticed the casings separating. The most important thing for casing adherence is proper protein extraction, use of a binder and (most importantly) get it into an ICE bath once it has reached target internal temperature. Don’t use cold water, it should be 50/50 ice and water. Or, if you use a shower method make sure that their is a fan blowing on those sticks
-
cdavis Team Blue Masterbuilt Canning Kamado Joes Regular Contributors Power User Sous Vide Oklahoma last edited by
John Belvedere I’ve been finishing my snack sticks in a turkey roaster and the casings stay tight. I get a great finished product and it saves me 3 to 4 hours of smoker time.
-
Just did trail bologna in the SV. Man what a difference! Before, I stayed away from 2.5”x24 casings because of the loooong cook. My last batch was smoked to 130 then finished in SV until 160deg. Only took an hour!! I will never do sausage again with smokehouse only. Oh, I didn’t bag. Straight into the bath. Perfect.
-
smokinbubba do you lose any flavor in the water? For some reason in my mind, I think how you boil other things to make stock
-
kyle I fought back against this for a long time because of that but you’re going to keep your water temp at 177 or around there so I don’t know if that makes a difference or what but it REALLY doesn’t reduce either the smoke or seasoning flavor as long as you let it smoke to 130 or so.
-
Jonathon thanks. So the one you have on sale for $75, would that be a good place to start, or would I be better off with the more expensive one? I hate to spend a lot on something I don’t understand. I did go back and watch your videos on this again. I know PapaSop started doing this. what one does he have?
-
glen Regular Contributors Team Grey Sous Vide Canning Dry Cured Sausage Masterbuilt Power User Meat Hack Winner Veteran last edited by
kyle I’m not PapaSop but I will weigh in that I have used a unit very similar to the Weston on sale and for home use it has worked great for 2 yrs
Also I highly recommend adapting an insulated cooler for your processing vessel
I cut a snug fitting hole in the lid of a Coleman 20 can party stacker and am very happy with it
Suggested Topics
Sponsored By:

Visit waltons.com to find everything for meat processing.
Walton's - Everything But The Meat!