How to Cook a Ham - Cured Whole Muscle Meat 105
-
How to Cook a Ham
Meat Block
14 lb Uncured Ham
1 Bag of Country Brown Sugar Cure
1 lb of California Ham SpiceEquipment
Walton’s Automatic Syringe Injector
VersanetProcess
To figure out how much cure and water you will need, you will first need to weigh your ham. This ham weighs 14 lb, which is known as its green weight. Country Brown Sugar Cure calls for 2 lb of cure to be mixed with 1 gallon of water for a 10% pump. For California ham spice, use .05lb per gallon of water. This means that we want to use the appropriate amount of cure and water and then pump 10% of the “green weight” into the ham, so a 14 lb ham will be 15.4 lb after it has been pumped.
Water
It is very important to use water that has low microbial levels and low to no chlorine; buying distilled water from your grocery store is a good way to ensure you will not have any issues with the water. If you are using tap water, leave it in an uncovered container in a cooler overnight to let any of the gas escape the water.
Injection Points
We recommend a 14-point injection for a ham. Starting at the thinner side, inject near the end once on each side of the bone and then move up the ham, making 4 more injections in a straight line until you reach the thicker end. Once you reach the thicker end, which should be your 6th injection, make 8 more evenly spaced injections around the end of the ham in a clockwise direction.
Cover Brine
Then we will use the remaining cure solution to cover our ham while we let it sit in the cooler overnight if you used a cure with sodium erythorbate or added it yourself, and 3-4 days if you did not. We want this to be a 50% strength solution, so our options are either to use the cure at the rate of 1 lb per gallon of water, or we can weigh what we have left over from our injection and add whatever it weighs in water so the cure would now be at a 50% strength solution.
Note
Next, it needs to be stuffed into a casing like Versanet so that it can then be hung in the smokehouse. You can choose to tie this Ham or use Ham Tubing; we like versanet as it is a plastic product that releases easily from the ham after the smoking process.
Thermal Processing & Smoking
1 Hour at 120° with no smoke
2 Hours 140° and begin smoking
4 Hours at 190° until internal temperature reaches 145°Cooling
Then hold this at room temperature for 1-2 hours before moving it to the refrigerator or vacuum packing it.
Wrap up
Now we have a beautiful homemade smoked ham that is going to taste at least as good as anything bought in the store!
Additional Tips
- If you have a market handsaw, you can make a cut perpendicular to the h-bone on the back of the ham.
What Is Ham?
Ham is the upper portion of a pig’s hind leg, it will usually be in the range of 16 inches long and around 12 inches wide at the widest point, and its weight will vary pretty dramatically. To cook it safely at low temperatures, it needs to be cured first, and because of the size of the ham, injecting it is a better choice than pickling or brining it to make sure the cure is evenly distributed.
Watch WaltonsTV: Ham Basics
Shop waltonsinc.com for Bratwurst Seasoning
Shop waltonsinc.com for Meat Grinders
Shop waltonsinc.com for High-Temp Cheese
Shop waltonsinc.com for Boning Knives
-
-
lholder We don’t do much dry curing and haven’t done any on hams. The process we have above is for smoked hams and I’m not totally sure what the different steps needed for making a dry-cured ham would be. I talked to our application specialist though and he did have some input on this, I am going to send that to you in a separate email. Hopefully, that information will help!
-
this recipe says to use 1lb of CA ham spice, but the CA ham spice says to use 0.05 lb per gallon… how much do I need?
-
cu_hunting The california ham spice is sold in 1 lb bags, use .005 per gallon of water.
-
In the other ham video you used cold phosphate and sodium erythorbate. What are the differences in using them or not? Also are these recipes good for hams that are going to frozen then recooked?
-
jcbar So, this is a basics video and I would consider those to be more advanced additives. The cold phosphate is going to increase the yield, juiciness and texture of the ham while the sodium erythorbate is going to act as a cure accelerator so we don’t need to hold it for more than overnight to allow the cure time to equalize. Now, I think a few guys on here would tell you to still hold it a day or two but after 12 hours, if it has been properly injected, you should be good
-
jcbar Yes, the amount of those additives is based on the weight of the meat, not the amount of what you are injecting
-
Thank you!
-
The directions listed above call for a 10% pump of green weight. The You Tube video Austin indicates a 20% pump of green weight.
Is it 10% or 20% of pump? -
TomKat1962 It is 10% pump. We think there was a change made in the cure in the last few years. it will say directly on the bag to “Use 2 lb of cure to each gallon of water for a 10% pump”
Here is a link to the product. I will talk to Austin about taking that other video down https://www.waltonsinc.com/country-brown-sugar-cure
-
If a ham is split into a butt and shank portion does it still need to be injected prior to picking or will the cure still gas out to soon
-
YooperDog Team Orange Masterbuilt Big Green Egg Dry Cured Sausage Sous Vide Canning Power Userreplied to Joe Christy on last edited by YooperDog
Joe Christy Are you talking about a shoulder and a butt or a ham and a hock? On larger cuts the meat is so thick that you want to get the pickle/cure down to the bone. How long do you have to cure it? If memory serves me you will get about a 1/4" of penetration per day, injection reduces your time line.
-
If you cut a whole ham in half you have a butt half and a shank half. Take any center cut ham slices off either than you have portions. I think that you will need to inject unless you dry cure and make old fashioned country style ham.
-
Using a whole bone in and frozen, should I add a day to the time to account for the thaw time?
-
mrobisr Team Blue Cast Iron Sous Vide Canning Dry Cured Sausage Masterbuilt Military Veterans Power User Regular Contributorsreplied to lholder on last edited by
lholder said in Cured Whole Muscle Meat 105 - Ham Basics:
Could the ham be hung and dried at this point without thermal processing to produce a country ham or prosciutto style?
No, the ham has too much water activity at that point. When dry curing you are not only curing the meat, but also dropping the moisture content to make the meat safe. I have used this method to make a shelf stable dry cured ham that I aged for 5 months before eating. The only reason I didn’t let it age the full 180 days was the wife complained that the cupboard smelled like a BBQ pit.
-
What would be your recommendation for temps and times for smoking when the low temp on my smoker is 150 deg. Do I hold it there longer before bumping up the temp?
